How to compare light-therapy lamps before buying
Choose a purpose-made light-therapy device using its stated intensity, working distance and model-specific instructions. Speak to a GP before trying light therapy, then compare the practical setup of the devices you are considering.
By LIRRA · Updated
Desk research using the frozen catalogue and the attributed source extracts; no hands-on testing.
Start with the NHS buying advice
The NHS guidance advises speaking to a GP before trying light therapy, particularly with eye conditions or medicines that increase light sensitivity. Its buying advice includes a UV-free light, a UKCA or CE mark and following the manufacturer's instructions. Take your reason for considering light therapy to that conversation.
Use the device's own manual when planning its position and operation. Keep the exact model name beside the manual and the working-distance specification. For a purchase prompted by a health concern, discuss suitability and use with your clinician; direct questions about the device's stand, plug and controls to the manufacturer or seller.
Prepare a simple comparison note before looking at decorative styling. Include the model, intended use, working distance, operating setting and the space available on your table. Save the instructions with the product reference. This makes it easier to compare the actual arrangements you could use and to ask a precise question about a particular device.
Read intensity, distance and duration together
Read a lux figure together with the distance and operating setting at which the maker states it. Put the lamp's proposed footprint on the table and sit in your normal place. Compare the intended distance with the space used by your breakfast, keyboard or paperwork. Allow room for the stand and the supply connection.
The manual for manufacturer example A gives the relationships shown in the table for its therapy setting. In table order, the stated durations are 30, 60 and 120 minutes. Use these as that model's instructions when reading the comparison.
For each shortlisted device, keep its own intensity, distance and duration entries together. Note the operating setting beside them. Put the model name at the top of the comparison so the controls and instructions remain attached to the same device when comparing another panel or a similarly named version.
| Linked example and setting | Stated distance | Stated intensity | Manufacturer duration |
|---|---|---|---|
| Example A, therapy | 20 cm | 10,000 lux | 30 minutes |
| Example A, therapy | 30 cm | 5,000 lux | 60 minutes |
| Example A, therapy | 45 cm | 2,500 lux | 120 minutes |
Compare another maker's complete arrangement
Manufacturer example B states 10,000 lux at 20 cm. Its instructions suggest starting with 30 minutes a day at arm's length, approximately 50 cm, where it states 2,500 lux. Read those positions with the specification and instructions for example B. Keep the headline intensity and intended use position together in your comparison.
For the device you choose, follow its manual and the advice given by your clinician. Save the version of the instructions corresponding to the delivered model. A side-by-side note is useful for comparing practical arrangements: the position on the table, access to controls and the room available around the lamp.
Compare the setup from the chair you will actually use. Mark the stand footprint and cable route, then put your normal table objects back in place. Choose an arrangement that lets the device sit in its intended orientation while leaving the surrounding activity usable. Keep the operating distance visible in that layout note.
Make a table-space plan
Measure the surface available for the full stand and body, including anything projecting behind the panel. Leave the access described in the manual around controls and connections. Place a paper outline at the proposed position and compare it with your keyboard, monitor, cup or books. A complete footprint makes a more useful comparison than a panel photograph alone.
Include the way you sit and move during normal use. Check whether reaching for a drink, opening a notebook or using the keyboard changes the planned arrangement. Choose the table position with the device's orientation instructions beside you. Keep its support stable and use the intended stand setting for that position.
If the device must be moved between uses, choose a storage place and a clear route to it. Keep its supply equipment together with the lamp. Allow room to lift and place the body using its intended handling method, and follow the maker's storage instructions when it is put away.
If the device will share a desk with another person, compare the proposed layout with both users' ordinary equipment in place. Keep the lamp's own setup instructions beside the room plan. Decide which items remain on the desk and which are stored elsewhere. Leave the intended support, connection and controls accessible when moving between activities.
Keep a comparison sheet for each candidate
Write down the model reference, intensity at its stated distance, operating setting and the manufacturer's use instructions. Add the full body and stand dimensions, connection location and controls. Put these beside the sketch of your available table space. Compare like entries between devices while keeping each maker's own setup intact.
Plan where the cable will run from the supply to the device. Keep it clear of moving furniture and leave enough access to use the connection as instructed. Include the supplied equipment in the layout, especially where a separate power unit needs a resting place. Use the power arrangement described for the actual device.
Check the model-specific intensity, distance and complete manual on the product page before ordering. Retain the seller's answers with the product reference. Keep the delivered instructions and model details together so questions about operation can refer to the particular device and setup rather than a general product description.
A useful comparison sheet can also include where the device will be kept, how it will be carried to the table and where the instructions will be stored. Keep those practical details with the model reference. They help you choose an arrangement that can be repeated in the space you actually have.
Plan ordinary task lighting separately
For reading or desk work, also plan where light reaches the page or working surface. Our lumen, cool-white and colour-changing pages explain ordinary lighting choices. Position the task light around the work while keeping the therapy device in the arrangement described by its own instructions.
If the room has several uses, note which equipment stays in place and which is put away. Allow access to each control without moving the other device. Keep a separate reference for the reading lamp and its preferred setting, making it easier for another household member to use the same desk arrangement.
Choose decorative finishes after planning the device position, support and control access. Consider how the body sits beside the monitor or furniture and where the supply equipment will be kept. Use the maker's care instructions for the actual device, and retain them with the other equipment information for the room.
Prepare for delivery and everyday use
Keep the chosen model reference and manual available when the device arrives. Compare the delivered model with your order and set it up using its instructions. Leave its packaging and paperwork together while arranging the table. Position the lamp and supply equipment in the planned places before adding other desk objects.
Put questions about suitability, expected health effects or your own use to your GP or clinician. For the stand, plug, controls or stated operating position, contact the maker or seller with the exact model reference. Keep their reply alongside the instructions so the answer remains attached to the correct device.
Retain the arrangement sketch and product details for later use. When moving the device to another table, compare the space, support and working distance afresh. Use the same model-specific instructions for the new position and keep controls and connections accessible. A clear setup note helps make the practical routine consistent when the room changes.
Questions and answers
Who should I speak to before trying light therapy?
The NHS advises speaking to a GP before trying light therapy.
How should I read a lux specification?
Keep it with the stated distance, operating setting and exact device model.
Where do I find the use duration?
Use the manufacturer's instructions for the particular device and setting, together with your clinician's advice.
What should I measure before choosing a device?
The complete stand and body footprint, available working distance and access for controls and supply.
What should I keep with the order?
The exact model reference, matching manual and any answers about its setup.
How should I plan a separate reading lamp?
Position it for the page or work surface while keeping the therapy device in its instructed arrangement.

Evidence and method
Catalogue counts and title/lux-field audits from tools/article_stats.py; distances and durations transcribed from linked manufacturer documents; health statements attributed only to the NHS; no product or clinical testing.
- NHS: seasonal affective disorder and light therapy
- Manufacturer example A: manual and English usage table
- Manufacturer example B: specification and duration